Car lift height rating de-mystified

Car lift height rating de-mystified
Whether youe an off-road enthusiast or just want the biggest, baddest car lift around, finding out how to properly measure the car lift height on your vehicle can be pretty important. It a simple procedure, but it not really common knowledge, so here a quick run-down of what you ought to do.

The first step in the process is to make sure that all four wheels have an even amount of air pressure in the individual and that they are filled with air to the proper amount for your vehicle. The reason for this is so you will get an accurate rating on all four corners.

The next phase is to park the automobile on a nice level surface, like a parking lot. Hopefully you put on live in Colorado, Colorado or Salt Lake City, Utah, where the vast majority of the driveways and parking lots are on a slant. Once you find a flat work surface to park on, get out of the automobile, and get your recording measure, pencil and paper. Beginning with the voyager front, measure from the ground to the bottom of the fender straight through the center of the tire. Write down your rating and proceed to the voyager backside and repeat the rating and write it down. Follow the same steps on the driver side.

After you have all four measurements, you can take the smaller rating on the driver side (almost always the front) and subtract it from the larger rating for a passing fancy side. Repeat these steps for the voyager side and you will observe how far off from level your car lift is.
A common result is that one side of the vehicle sits a little tall than the other. This is pretty common, since most vehicles will lean a little bit towards the side of the car lift that the fuel container is on, so unless it an improvement of a few in . between the driver and voyager side then it really nothing to worry about.
Whether it a simple budget boost or a complete custom suspension with a solid axle conversion, find a team of experts at your local garage to find the parts you need, and the answers to all of your questions.

For anybody who put on follow what being said here, a suspension car lift is a modification that Jeep, truck, SUV and off-road enthusiasts like to do to increase the ride height of their vehicle. A lot of other factors are impacted when car lift are installed, so be sure to find an expert garage to give you advice on your project.http://www.mornlift.com/car-lift.html